Epoxy floors in Northern Michigan.

Ground-in flake floors for garages, pole barns, shops and basements, from the Lake Huron shore to Grand Traverse Bay. Pick your town, or call and ask.

Get a quote Call (989) 255-1435

A finished flake epoxy floor across a pole barn

Northern Michigan

Why the work is different up here.

Concrete has a hard life up here. Road brine comes home on the tires, melts on the slab and soaks into the pores. Then the temperature drops through freezing and back again, over and over, and the surface starts to lift. That happens the same in a Rogers City garage as in a Traverse City one, and it is why we start with the concrete and not the coating.

Every floor gets the same system. A diamond grinder with dust extraction goes over the whole slab, cracks and pitting get filled while the floor is open, a wet base coat bonds to the concrete, flake goes down by hand until the surface will not take any more, and a clear coat seals it. New pole barns are the easiest floors we do, because they can be coated before the walls close in. Basements get checked first for moisture coming up through the slab.

Every town

Pick your town.

Alpena and the Sunrise Coast

Gaylord and the center of the state

Petoskey, Charlevoix and the Straits

Traverse City and Grand Traverse

Do not see your town? Call and ask. Compare us with 12 other companies.

What we do

What you can call us for.

Garage floorsAttached or detached. Old concrete that has already taken some winters of salt gets ground back to sound material, then sealed.Pole barn and shop floorsEasiest before the walls close in. Same full prep as a garage, because these are working floors.Basement floorsCottage or year-round. We check for moisture coming up through the slab first, then seal it so it mops clean.Flake finishesForty blends in five families. We bring the boards to your slab so you can pick in your own light.

Questions

Epoxy floors in Northern Michigan: questions.

Do you install epoxy floors in Northern Michigan?

Yes. We cover 48 towns across Northern Michigan. Call (989) 255-1435 or send a photo of the slab and a rough size. We look at the concrete before anything is quoted.

Can I just roll a hardware store kit onto my garage floor in Northern Michigan?

You can, but it usually lifts by spring. A roller and a jug of etching acid do not open the troweled surface of the concrete, so the coating dries onto a skin. Hot tires and salt brine peel that skin off. Grinding is the difference.

Can a floor in Northern Michigan be coated in the winter?

Yes. Epoxy cures inside a closed building, so this is year-round work. Before the snow is easier, though: the garage is easier to empty and nobody is driving a salted vehicle back onto a new floor. How long to stay off it is something we tell you for your floor when we quote it.

Get a quote

Tell us where it is.

The phone is faster, and a photo of the concrete gets you a more useful answer than a description of it.

Call(989) 255-1435 Also(231) 944-8752